200 type stubble cutting drill (drive wheel)
Product Details
1、 Product Introduction
The 200 type stubble cutting and drilling machine is a side drive stubble cutting and rotary tillage and drilling machine that is paired with wheeled tractors with a horsepower of over 50. The whole machine has good rigidity, reasonable structure, balanced stress, and strong soil crushing force. One rotary tillage can achieve the effect of several plows and rakes in a typical operation. Due to the fact that the plowing range of the implement is larger than the outer edge of the rear wheel of the matching tractor, there are no tire marks after plowing, and the surface is flat after operation, with high coverage rate. It can be used not only for dry and water plowing in farmland, but also for shallow tillage and covering in saline alkali soil. After installing the seeding assembly on the implement, it can be used for drilling or hole drilling operations.
2、 Main technical parameters
| Model | 1GTN-200-Z |
| Supporting power, KW | ≥37 |
| Tillage range, mm | 2000 |
| Tillage depth, cm | 8~14 |
| Number of rows sown, rows | 14 (adjustable) |
| Blade form | 1T210 |
| Number of blades (pieces) | 88 |
| Power output shaft speed, r/min | 720 |
| Productivity, hm 2/ h | 0.27-0.40 (4-6 acres/hour) |
| Blade rotation speed, r/min | 280 |
| Bevel gear ratio | 14:32 |
| Oil consumption of cultivated land, kg/hm 2 | 12~16 |
| Transmission mode | Side gear transmission |
| Connection form with tractor | Standard three point suspension |
| Filling amount of gear oil, kg | 6 |
| Structure weight, kg | 430 |
| Overall dimensions (length x width x height), mm | 2300x2400x1280 |
- Previous:Chapter 1
- Next:200 type stubble cutting drill
